| 详细介绍：
聚酯薄膜胶带厂家信赖东莞辰泰价格合理
关于模切过程中，离型膜通常会遇到如下的问题：
1、双面胶与PET离型膜贴合后，剥离时有部分双面胶带会产生反剥离，并发出异样的声响。
2、反剥离是该剥离的材料没有剥离。
3、冲切好放置一段时间后胶带与离型膜无法剥离。
4、离型膜离型力很低，感觉离型层很容易脱落。
5、离型膜在收卷过程中会产生静电，吸附灰尘。
涂布参数：
涂布厚度：5-10μM(干胶)
烘干温度：80-100℃
干燥时间：> 0.5分
熟化时间：48小时我公司能提供下列不同质量、颜色、可印刷性、厚度、长度、宽度和剥离力的保护膜：
A): 保护膜类型：以聚乙烯为基材，涂压敏性油胶或水胶；
B): 聚酯薄膜胶带厂家信赖东莞辰泰价格合理；乳白膜；黑白膜；蓝膜；黑膜；绿膜等;
C): 可印刷性：可在膜的表面印刷商标、公司名字1-2种颜色;
D): 厚度：3-15丝;
E): 长度：1500米以内
F): 宽度：1.5 米以内
G): 剥离力：5-1500 g/50mm 铝型材、铝门窗、喷涂铝板、机械设备等表面保护膜特点：具有很好的抗老化性和稳定的粘着力；防紫外线达6个月；易撕易贴、剥离无残胶
主要规格：3—10丝; 乳白膜，黑白膜，印字膜，蓝膜，透明膜等 1.五金行业：电脑机壳，镀锌板冲压，铝板，不锈钢板，钛金板 ，塑钢板，玻璃板，太阳能电池板等等。
2.光电行业：LCD液晶显示器，背光板，冷光片，薄膜开关，手机屏幕等等。
3.塑胶行业：ABS、PP注塑制品，PVC板材，亚克力板，仪表，塑胶镜片，喷漆件表面保护等等。
4.印刷行业：PVC、PC板，铝板，胶片等印刷铭板表面保护等等。
5.电线电缆行业：轴装铜线、半成品、成品、打卷成品的保护，可有效防止灰尘污染，有防氧化、防脏污作用。
6.电子行业，在生产的时候，一般都要用到保护做起的成品与半成品，在流水线上不容易出现划伤和碰坏！
7.手机数码行业，手机贴膜又称手机美容膜、手机保护膜，是可用于装表手机机身、屏幕的一种冷表膜。
1）PE保护膜的厚度：0.03mm-0.15mm
2）颜色：透明，蓝色，黑色，乳白色，黑底白面色，特殊颜色可根据客户定
3）宽度：1650mm以内，长度在1000M以内
4)粘着力：5-610g/50mm PE保护膜以特殊聚乙烯塑料薄膜为基材,一交联型丙烯酸树酯作胶粘剂,再经过几种特殊助剂加工而成.性质柔软,粘着性能好,容易粘贴,容易剥离,剥离无残胶。 -
pe protective film applications
1 hardware industry: computer case, galvanized plate stamping, aluminum, stainless steel, titanium plates, steel plates, glass, solar panels and so on.
2 optoelectronic industry:. LCD liquid crystal display, backlight, EL, membrane switch, the phone screen, and so on.
3 plastic industry:. ABS, PP injection molding products, PVC sheet, acrylic sheet, instrument, plastic lenses, painting surface protection and so on.
4 printing industry:. PVC, PC boards, aluminum, film and other printed nameplates surface protection, and so on.
5 wire and cable industry: copper shaft-mounted, semi-finished products, finished playing roll protection, can effectively prevent dust pollution, anti-oxidation, anti-soiling effect.
6. Electronics industry, at the time of production, generally start to be used in the protection and semi-finished products in the pipeline is not prone to scratches and break something!
7 digital mobile phone industry, also known as Mobile phone film Beauty film, mobile phone protective film is applied to a cold surface membrane fitted sheet phone body, screen 
pe保护膜按粘力分主要为： 超低粘保护膜、低粘保护膜、中低粘保护膜、中粘保护膜、高粘保护膜、超高粘保护膜 1. 超低粘保护膜(即微底粘): 特性: 厚(≥0.03m±0.003), 宽(≤1.3),高(100-1500),基材(PE),剥离强度(≤5g/cm),耐温(60),拉伸率(>400) 用途: 使用方便易贴易撕,无残胶现象,适用于有机板材,仪器仪表,显示屏,玻璃镜片,塑料镜片等. 2. 低粘保护膜 特性: 厚(≥0.03m±0.003), 宽(≤1.3),高(100-1000),基材(PE),剥离强度(10-20g/cm),耐温(60),拉伸率(>400) 用途: 粘力稳定,贴附性好,再剥落性能良好,无残胶现象,适用于钢镜板,钛金属,光面塑胶板,丝印,铭名牌等. 3. 中低粘保护膜 特性: 厚(≥0.03m±0.003), 宽(≤1.3),高(100-1000),基材(PE),剥离强度(30-50g/cm),耐温(60),拉伸率(>400) 用途: 粘力稳定,贴附性好,再剥落性能良好,无残胶现象,适用于家具宝丽板,不锈钢板, 瓷砖、云石、人造石材等. 4. 中粘保护膜 特性: 厚(≥0.05±0.003), 宽(≤1.3),高(100-1000),基材(PE),剥离强度(60-80g/cm),耐温(60),拉伸率(>400) 用途: 粘力稳定,贴附性好,再剥落性能良好,无残胶现象, 适用于细纹磨砂板和一般难粘材料表面保护等. 5. 高粘保护膜 特性: 厚(≥0.05±0.003), 宽(≤1.3),高(100-800),基材(PE),剥离强度(80-100g/cm),耐温(60),拉伸率(>400) 用途: 粘力稳定,贴附性好,再剥落性能良好,无残胶现象, 适用于细纹磨砂板,铝塑板,难粘塑料板材等. 6. 超高粘保护膜 特性: 厚(≥0.04±0.003), 宽(≤1.3),高(100-800),基材(PE),剥离强度(100g/cm以上),耐温(60),拉伸率(>400) 用途: 粘性特高,选用水性丙烯酸作压敏胶,使用方便,易贴易撕,无残胶现象.适用于粗纹铝板等难粘材料 pe protective film by stick force of mainly: ultra-low viscosity protective film , protective film of low viscosity , low viscosity protective film , protective film in the sticky , viscous protective film , super sticky protective film
An ultra-low viscosity protective film ( ie micro- bottom stick ) :
Characteristics : Thickness (≥ 0.03m ± 0.003), width (≤ 1.3), high ( 100-1500 ) , the substrate (PE), the peel strength (≤ 5g/cm), temperature ( 60 ) , an elongation ( > 400 )
Use: Easy to use and easy to paste tear , no adhesive residue phenomenon for organic sheet , instrumentation , display, glass lenses, plastic lenses , etc.
(2) low viscosity protective film
Characteristics : Thickness (≥ 0.03m ± 0.003), width (≤ 1.3), high ( 100-1000 ) , the substrate (PE), the peel strength (10-20g/cm), temperature ( 60 ) , an elongation ( > 400 )
Purpose : tack stability, good adhesion , good performance and then peeling , no glue residue phenomenon for steel mirror plate , titanium metal , glossy plastic plates, screen printing, Ming brand and so on.
3 low viscosity protective film
Characteristics : Thickness (≥ 0.03m ± 0.003), width (≤ 1.3), high ( 100-1000 ) , the substrate (PE), the peel strength (30-50g/cm), temperature ( 60 ) , an elongation ( > 400 )
Purpose : tack stability, good adhesion , good performance and then peeling , no glue residue phenomenon , for furniture Polaroid plate, stainless steel , ceramic tile , marble , artificial stone and so on.
4 . The sticky protective film
Characteristics : Thickness (≥ 0.05 ± 0.003), width (≤ 1.3), high ( 100-1000 ) , the substrate (PE), the peel strength (60-80g/cm), temperature ( 60 ) , an elongation ( > 400 )
Purpose : tack stability, good adhesion , good performance and then peeling , no glue residue phenomenon applies to lines matte board and general difficult to stick surface protection.
5 . Viscous protective film
Characteristics : Thickness (≥ 0.05 ± 0.003), width (≤ 1.3), high ( 100-800 ) , the substrate (PE), the peel strength (80-100g/cm), temperature ( 60 ) , an elongation ( > 400 )
Purpose : tack stability, good adhesion , good performance and then peeling , no glue residue phenomenon applies to lines matte board, plastic plates, plastic sheets and other difficult to stick .
6 ultra- sticky protective film
Characteristics : Thickness (≥ 0.04 ± 0.003), width (≤ 1.3), high ( 100-800 ) , the substrate (PE), the peel strength (100g/cm above ) , temperature ( 60 ), an elongation ( > 400 )
Purpose : ultra-high viscosity , the choice of water-based acrylic pressure-sensitive adhesive for easy to use, easy to paste and easy to tear , no adhesive residue phenomenon for coarse grain aluminum so difficult to stick materials. 
联系人：陈礼兵（先生）手机：13556790460 电话：86-0769-83390822 82984581 传真：86-0769-83390833 阿里巴巴网站：http://chentai1010.cn.alibaba.com/ 辰泰公司网址：http://www.jiaodai68.com E-mail：jiatai1011@126.com 厂址：东莞市常平镇桥沥马屋管理区
|
放大图片
暂无相关下载
